Area of use
A powerful 38 horsepower Yanmar diesel engine ensures the RoboFlail vario when there is a trans- mission of power from 330 NM on the power take-off (1,000 rpm). This performance represents the accessory equipment with virtually no loss.
It can be fitted to any Category 1 equipment up to 450 kg. By default, a lateral slide of up to 40 cm is available. This, as well as the very high lifting, may be limited if necessary. The continuous release of the RoboFlail vario lower steering is set using the remote control.
As an example, this flexibility can be used in forest management. Featuring with a forest winch, it can also advance into remote corners of the forest . Here, the vario works well as a felling aid. The engine of the RoboFlail vario is pivotally fitted, the emphasis is always oriented towards the slope to align the system optimally on the hillside.
Success factors
- Various standard attachments can be used
- Optimum adaptation of the attachment to the operating conditions
- Full power available at the PTO
- Better traction on slopes
- Higher gradeability with little damage to the ground
- Soft control without additional electric actuators
- less traces on the slope
- Correct tensioning of the chain as the value can be read off, therefore no chain jumping off
- No clogging of the cooler possible
- Refill the tank only once a day
Technical data
-
Yanmar
-
Diesel engine, water-cooled
-
-
-
38 HP / 28 kW
-
-
1.200 kg
-
45° (depending on surface)
-
Hydrostatic via two pumps with two wheel motors (loaded brake)
-
max. 8 km/h
-
